Processor block boilers model mTronic 7000 (6kW-24kW) - high wall mounting
New model mTronic 7000 it is the most perfect electric boiler, derived from the eTronic 7000 model produced by Mikoterm for the German company Robert Bosch. Mikoterm designed and produced the boiler from the ground up. The biggest advantage is the user interface, the way of monitoring and protecting both the boiler and the parameters of the complete heating system. In this model, as in all other models of Mikoterm boilers, only quality components of renowned domestic and foreign manufacturers are installed: Siemens, Wilo, Wago, Benedict, ATA, Zilio, Finder, Caleffi, Sintermetal... Boiler management was carried out via a processing unit and a large LCD display. The processor unit provides monitoring of all essential characteristics of the boiler and the heating system itself (video-description of CPU functions). This ensures safe and long-lasting operation of the boiler. The LCD display allows for clear and precise adjustment of vital parameters on the device. The setup is simplified to 4 soft touch buttons. Through the processing unit, the running time of each heater can be monitored separately, as well as the entire device. The operating mode can be set to normal and anti-freeze mode. The precise design also provides a very easy work for service providers and installers. The device has 4 degrees of protection and warning alarms if some parameters are in critical values (video-errors and warnings CPU). the mTronic7000 is more advanced than the eTronic7000 for the following functions:
-
Possibility to choose priorities in work: heating or hot water preparation
-
Frost protection of water in the system at low temperatures
-
Selection of the modulation (reduction) level of engaged boiler power during operation, which contributes to lower electricity consumption
Galerija
Download instructions for mTronic 7000:
| model | mT-6 kW | mT-9 kW | mT-12 kW | mT-18 kW | mT-24.3 kW |
|---|---|---|---|---|---|
| heating groups | 3 x 2 kW | 6 x 1.5 kW | 6 x 2 kW | 9 x 2 kW | 9 x 2.7 kW |
| power adjustment | 3 x 2 kW | 6 x 1.5 kW | 6 x 2 kW | 9 x 2 kW | 9 x 2.7 kW |
| minimum power | 2 kW | 1.5 kW | 2 kW | 2 kW | 2.7 kW |
| maximum power | 6 kW | 9 kW | 12 kW | 18 kW | 24.3 kW |
| fuses in the boiler | 3P 16A | 3P 25A | 3P 25A | 3P 32A | 3P 40A |
| required main fuses | 3 x 16A | 3 x 25A | 3 x 25A | 3 x 32A | 3 x 40A |
| the required network cable. | 5 x 2.5 mm2 | 5 x 2.5 mm2 | 5 x 4 mm2 | 5 x 4 mm2 | 5 x 6 mm2 |
| connection to the electrical network | up, down, between the walls | up, down, between the walls | up, down, between the walls | up, down, between the walls | up, down, between the walls |
| pump for mTronic 7000 | a highly efficient pump. | a highly efficient pump. | a highly efficient pump. | a highly efficient pump. | a highly efficient pump. |
| connection to hydraulic installation | G3 / 4 " from the bottom | G3 / 4 " from the bottom | G3 / 4 " from the bottom | G3 / 4 " from the bottom | G3 / 4 " from the bottom |
| expansion vessel | Zilio Italy 8L | Zilio Italy 8L | Zilio Italy 8L | Zilio Italy 8L | Zilio Italy 8L |
| sigurnosni ventil | integrisan unutra | integrisan unutra | integrisan unutra | integrisan unutra | integrisan unutra |
| slavina za pražnjenje kotla | yes | yes | yes | yes | yes |
| dimenzije (VxŠxD) | 710x430x230 | 710x430x230 | 710x430x230 | 710x430x230 | 710x430x230 |
| težina kotla bez vode | 23kg | 24kg | 24kg | 25kg | 25kg |
| degree of protection. | IP 40 | IP 40 | IP 40 | IP 40 | IP 40 |
| procesorska jedinica | yes | yes | yes | yes | yes |
| priprema sanitarne vode | yes | yes | yes | yes | yes |
| tajmer za pripremu san. vode | yes | yes | yes | yes | yes |
| monophase connection | yes | yes | no | no | no |