Menu Close

Electric processor boilers model TK-Profesional 120kW-240kW - floor mounting 

Boilers TK-Professional 120-240kW are compact devices intended for heating larger residential or commercial buildings. The boiler body is made of sheet steel, tested at a pressure of 6 bar, while the maximum working pressure is 4 bar. The flanges with which the boiler is connected to the heating installation are located on the back side of the boiler. There is a filling and emptying tap on the return pipe of the boiler (lower), and a safety valve and an automatic venting pot on the pressure pipe (upper). The lower door covers the switchboard with complete boiler automation and regular clamps for connecting the power cable, as well as auxiliary terminals for connecting the control for the circulation pump and the room thermostat. The boilers are equipped with a "Multistage protection" protection system, which permanently monitors the temperature and pressure in the system. If the pressure or temperature approaches illegal values, it shows appropriate warnings on the display, and if the limit values ​​of pressure or temperature are exceeded, it turns off all heaters, that is, in the third level of protection, it turns off the complete power supply of the device using voltage triggers, which guarantees safety. Boilers TK-Professional 120÷240kW can optionally be connected to a centralized monitoring and control system (BMS, SCADA,...), via the RS485 RTU module, using the ModBus protocol. The possibility of connecting up to 10 boilers (of the same power) in cascade mode with an additional Cascade regulator.

Galerija

 

tK Profesional procesorski blok kotao snage of 120-240 kW. Industrijski kotao podne montaže za velika postrojenja.

  Download technical sheets for electric boiler power 120-240kW:

Download CAD block for TK-professional 120-240kW

Technical characteristics 120kW 140kW 160kW 180kW 200kW 240kW
Weight 150kg 150kg 150kg 150kg 150kg 150kg
Court volume 165 litres 165 litres 165 litres 165 litres 165 litres 165 litres
Heaters 12x10kW 14x10kW 8x20kW 9x20kW 10x20kW 12x20kW
Gr. groups 6x20kW 7x20kW 8x20kW 9x20kW 10x20kW 6x40kW
Voltage 3N ~ 400/230V 50Hz 3N ~ 400/230V 50Hz 3N ~ 400/230V 50Hz 3N ~ 400/230V 50Hz 3N ~ 400/230V 50Hz 3N ~ 400/230V 50Hz
Connectors DN65; 2.5" DN65; 2.5" DN65; 2.5" DN65; 2.5" DN65; 2.5" DN65; 2.5"
Min and Max (P) 0.4 bar ÷ 4 bar 0.4 bar ÷ 4 bar 0.4 bar ÷ 4 bar 0.4 bar ÷ 4 bar 0.4 bar ÷ 4 bar 0.4 bar ÷ 4 bar
Safety valve 1 x 3 / 4col 4.5 bar 1 x 3 / 4col 4.5 bar 1 x 3 / 4col 4.5 bar 1 x 3 / 4col 4.5 bar 1 x 3 / 4col 4.5 bar 1 x 3 / 4col 4.5 bar
IP protection IP20 IP20 IP20 IP20 IP20 IP20
Operating temperature 10 ÷ 90°C 10 ÷ 90°C 10 ÷ 90°C 10 ÷ 90°C 10 ÷ 90°C 10 ÷ 90°C
Sigurnosni termostat 95 °C 95 °C 95 °C 95 °C 95 °C 95 °C
Fuse box 6 x 3P C40A 7 x 3P C40A 8 x 3P C40A 9 x 3P C40A 10 x 3P C40A 12 x 3P C40A
Max struja 3 x 174A 3 x 203A 3 x 232A 3 x 261A 3 x 290A 3 x 348A
Potrebni glavni osigurač 3 x 200 A 3 x 250 A 3 x 250 A 3 x 300 A 3 x 315 A 3 x 400 A
Priključni kabl 2 kabla Cu 3 x 35mm² 2 kabla Cu 3 x 50mm² 2 kabla Cu 3 x 50mm² 2 kabla Cu 3 x 70mm² 2 kabla Cu 3 x 70mm² 2 kabla Cu 3 x 95mm²
Potreban zaštitni vod Cu 1 x 35mm² Cu 1 x 35mm² Cu 1 x 50mm² Cu 1 x 50mm² Cu 1 x 70mm² Cu 1 x 70mm²